India’s Caste System

The caste system is a system of division of labour and power in human society. It is a system of social stratification, and a basis foraffirmative action. Historically, it defined communities into thousands of endogamous hereditary groups called Jatis. The Jatis were grouped by the Brahminical texts under the four well-known caste categories (the varnas): viz Brahmins, Kshatriyas,Vaishyas, and Shudras. Certain people were excluded altogether, ostracized by all other castes and treated as untouchables.Although identified with Hinduism, caste systems have also been observed among other religions on the Indian subcontinent, including some groups of Muslims, Buddha. Caste is commonly thought of as an ancient fact of Hindu life, but various contemporary scholars have argued that the caste system was constructed by the British colonial regime. Caste is neither unique to Hindu religion nor to India; caste systems have been observed in other parts of the world, for example, in the Muslim com munity of Yemen, Christian colonies of Spain, and Japan.The Indian government officially recognizes historically discriminated lowest castes of India such as Untouchables and Shudras underScheduled Castes, and certain economically backward castes as Other Backward Castes. The Scheduled Castes are sometimes referred to as Dalit in contemporary literature. In 2001, the proportion of Dalit population was 16. 2 percent of India's total population. Since 1950, India has enacted and implemented many laws and social initiatives to protect and improve the socio-economic conditions of its Dalit population.By 1995, of all jobs in the Central Government service, 17. 2 percent of the jobs were held by Dalits. Of the highest paying, senior most jobs in government agencies and government controlled enterprises, over 10 percent were held by members of the Dalit community, a tenfold increase in 40 years but yet to fill up the 15 percent reserved quota for them. In 1997, India democratically elected K. R. Narayanan, a Dalit, as the nation's President. In the last 15 years, Indians born in historically discriminated minority castes have been elected to its highest judicial and political offices.While the quality of life of Dalit population in India, in terms of metrics such as poverty, literacy rate, access to health care, life expectancy, education attainability, access to drinking water, housing, etc. have seen faster growth amongst the Dalit population between 1986 and 2006, for some metrics, it remains lower than overall non-Dalit population, and for some it is better than poor non-Dalit population. A 2003 report claims inter-caste marriage is on the rise in urban India.Indian societal relationships are changing because of female literacy and education, women at work, urbanization, need for two-income families, and influences from the media. India's overall economic growth has produced the fastest and most significant socio-economic changes to the historical injustice to it s minorities. Legal and social program initiatives are no longer India's primary constraint in further advancement of India's historically discriminated sections of society and the poor. Further advancements are likely to come from improvements in the supply of quality schools in rural and urban India, along with India's economic growth.

Automobile †Opel Essay

Introduction – A museum is an institution that cares for (conserves) a collection of artefacts and other objects of scienti$c, artistic, cultural, or historical importance and makes them available for public viewing through exhibits that may be permanent or temporary. Museums have varying aims, ranging from serving researchers and specialists to serving the general public. Purpose of study – ?A car represents status. A car is symbol of power. There are many car enthusiast’s in our country. ?There are many rich people that own a antique or a latest high technology car. ? And on other had there are many people who cannot a/ord such an expensive car but have a great interest in them. ?Most of the car museums we see holds only the vintage cars. ?Thus there is a need felt to provide a new building typology which can o/er a range of cars to view, from vintage to the modern, for all the car enthusiast’s to look out. SOURABH SHALGAR FOURTH YEAR (CM) ROLL NO:27 1 An Automobile Museum – Same as an ordinary museum, an Automobile museum is a museum where a range to cars are for display for the people to view. Purpose of an Automobile Museum – ?The main purpose is to provide a stage where people can display there cars. ?Giving people an opportunity to see a wide range of cars under one roof. ?Along with that providing ancillary activities such as a track for drag racing , where various events can be performed. ?Helping the car companies to display there cars which can help them advertising there brand, and giving a chance to people to compare between to companies. ?Along with that to provide all the amenities to ensure the comfort of the visitor. ?To make the Museum a tourist attraction so that it will be a revenue generation place for the city. Aim – ?Attract people to visit the museum. SOURABH SHALGAR FOURTH YEAR (CM) ROLL NO:27 2? To provide display for a variety of cars and companies. ?To knowledge people about history of the car companies. ?To make the museum a tourist attraction point. ?To entertain the visitors. Design Strategies – To achieve the aims , the components which can be used in design are ; ?Granduarness should be created by the structure which can act as the landmark of that place. ?Ambience should be created such that visitors should enjoy. ?Display areas created should keep the Status and luxury of the car companies. ?Metal Innovative Architecture must be used to give the structure the iconic look. SOURABH SHALGAR FOURTH YEAR (CM) ROLL NO:27 3.

Human Resource Management (case study) Essay Example | Topics and Well Written Essays - 1500 words

Human Resource Management (case study) - Essay Example Moreover, the furniture will be standardized and customer’s requirements will not be met because it can probably increase the cost. However, the company is not in a position to cope up with any unplanned change because it can’t afford any changes in the production process and the design of product due to the excessive cost of implementing the changes. Question 2: Based on your evaluation of the strategy approached by each organization what would be the most likely HR strategy? Answer: The working conditions and job descriptions will be fixed and rigid. The job descriptions will cover clearly defined tasks and responsibilities with no room for flexibility. The job duties will give little or no room for career progression to the employees because the tasks will require specialization in one specific area and the employees will not be able to learn new skills and abilities. The chances for training and development are extremely limited because the furniture is manufactured on basic standards which don’t require updating the skills. As a result, the performance appraisal will be done on efficiency and effectiveness of the employees. In other words, the employees will be evaluated on the quantity of items produced irrespective of quality. The wages of front line employees will be based on number of items produced each hour and bonus/rewards can be expected on overproduction. The salary structure of the employees will be competitive and company will pay at/below the industry standards. Efforts will be made to recruit cheap labors and the jobs of highly paid workers will be unsecured so that cost can be minimized and the supervisors will ensure that labor productivity is enhanced and employees don’t sit idle. Overall, a short term profit making approach is adopted. Question 3: Is this approach of linking Porter’s competitive strategy to HR strategy has its limitations? Evaluate what you consider these limitations can be. Answer: the porter’s competitive strategy is very generic and its approach is very limited and narrow. Porter says that the company should follow only one strategy at a time so that it doesn’t lose focus. On one hand, Benchill & Sons uses tight cost control to reduce prices but on the other hand, it needs to change its policies with the changing trends in the market and the economy. For e.g. the company can go for technological advancement or may be it can purchase raw materials form cheap countries like china or India, in order to reduce cost. However, this approach is very practical for non-profit organizations because their sources are limited but for benevolent owners this approach is not good for the reputation of the company. On the other hand, for profit making companies, the background of entrepreneur, the nature of industry, competitors, buying patterns of customers, technology and minimum standards set by ISO are important factors to consider before adopting any competit ive strategy. The best employment practice is to ensure better utilization of resources while not exploiting the workers, maintaining a fair quality standard and using relationship marketing approach to ensure repeat sales in order to beat the competitors. SPEKE FURNISHINGS Question 1: evaluate which of the Porter’

Practical Project Essay Example | Topics and Well Written Essays - 250 words

Practical Project - Essay Example Set the preheat control in a stalemate position to avoid damage and fire in the event that a backfire happens. Start the propeller and energize the engine starter after the propeller has rotated at least twice. Turn the primer switch on sporadically to start the engine. Once the engine start running, hold the primer for some time and at the same instant opening the throttle gradually to obtain a smooth running. After the engine starts to operate smoothly, open the mixture control to the full rich level. Observe the engine’s rpm indicator to identify any drop of rpm. A drop in rpm shows that the engine has started receiving additional fuel from the carburetor and therefore one can release the primer. To shut down the engine, turn off all the fuel pumps and set the gas mixture to cut off position. This is necessary for draining the engines to shut them down automatically. Essentially, following the above-discussed process will lead to a safer start and shutdown of the reciprocat ing

I haven't picked a topic as yet but I would like it to be something Thesis

I haven't picked a topic as yet but I would like it to be something about education in adulthood - Thesis Example The rationale for undertaking this research was the researchers expectations to make recommendations to the educational institutes about using different teaching styles and methods while teaching the adult learners. The current research was undertaken using an interview method where 5 teachers from pre-adult school and teaching children between the ages of 4-11 years, and another 5 teachers from an adult learning center who taught in higher educational institute years were selected. These respondents were selected on the basis of convenience sampling as both the institutes were easily approachable to the researcher. Further, the researcher himself had taught at the pre-adult school earlier and was currently teaching at the higher educational institute, and as such, it was easier for him to interact with the faculty and get their responses. The research findings revealed that the teachers were indeed making use of some different teaching methods. For example, teachers of adult learners made use of discussion and case study methods in addition to the lecture and question answer methods. In the case of children, the most reported method of teaching was lecture, question and answer, and periodical assessment. The research findings indicate that there is further scope for the teachers to make use of more teaching methods in order to facilitate better learning, For example, there are several methods like the case story method, the course portfolio method, interactive multi-media, critical thinking and demonstration and role playing methods, which have been reported to bring a better understanding of the subject material for the adult students. The research revealed that the teachers were aware of the different motivations and approaches of their adult and children learners and tried to modulate their teaching styles and behaviors in the

Research paper on the company Rolex, its channel market, competition,

On the company Rolex, its channel market, competition, distributions patterns. and channels - Research Paper Example Since the company has been successfully meeting demands of its consumer and consistently introducing creative and innovative designs in the market, the management and distribution strategies followed by the wrist watch manufacturer is of great interest. One of the critical aspects in quality management is logistics and supply chain as well as channel management. In the present research, various channel management strategies of Rolex will be evaluated. The research will throw light on the distribution patterns and various marketing strategies. Competitor analysis and business drivers will also be discussed. Company Description Rolex is a private watch manufacturing conglomerate involved in production, distribution and service of wristwatches under Tudor and Rolex brands. It was founded in the year 1905 in London, England by Alfred Davis and Hans Wilsdorf. The current headquarters is situated in Geneva and it has its distribution arms worldwide. Gian Riccardo Marini is the current CEO and by 2010, the total revenue earned by the watch manufacturer was 5.1 billion dollars. The company has over 2000 employees and produces more than 2000 watches every day (Yahoo, 2013) A Rolex watch on the wrist of a customer is expected to enhance the personality and style of that person. It has become a symbol of great taste and fashion. Since these watches are exclusively designed for upper class segments, not many of the people get the opportunity of owning this prestigious brand. In the year 2007, Rolex was announced as 71 on a list of 100 most valuable brands of the globe by Bloomberg Businessweek (Businessweek, 2007). During its tenure the company has achieved many milestones in terms of innovation and creativity. In the year 1926, Rolex introduced waterproof watch and became the first brand to do so. All Rolex watched are designed and manufactured with materials of dine quality and with much detail so that chances of error and mistakes are minimized. Focusing on developing w ell-designed and realistic marketing and channel distribution strategy is crucial in order to build a successful brand. Products The major brands produced under Rolex SA are Tudor and Rolex. There are three watch lines for Rolex; Professional, Oyster Perpetual and Cellini. Some of the famous modern and well-known models of the Rolex brand includes submariner, Yacht- Master, Day-date, Daytona, Day-just etc. Few of the famous Cellini models include Quartz Mens, Cellinium, Cestello Ladies etc. Retail pricing varies according to quality, materials used and models. Accordingly, Rolex watches can range from 650 dollars to 80000 dollars. Product Distribution System A distribution strategy is used in order to make products available to the target customers. Rolex has a worldwide presence. Naturally, the company has been using a comprehensive distribution strategy in order to reach its customers residing in various ends of the globe (Kerin, Hartley & Rudelius, 2011).The overall product distr ibution system includes geographic coverage, distribution channel market and distribution patterns. Geographic coverage Rolex is an international brand. The brand name Rolex was developed so that it can be easily pronounced in various languages. Having a famous Swiss background has made the brand easily recognizable in North America and Europe. The brand covers 28 worldwide affiliates and has around 4000 watchmakers working in more than 100 countries round the globe. The brand has established retail distribution in almost every

VLAN in todays enviroment Essay Example | Topics and Well Written Essays - 1000 words

VLAN in todays enviroment - Essay Example But when studied further both LANs and VLANs it serves more than interconnection: personal computer networks to backend networks or even storage area networks. And in most cases, the purpose of a LAN is a combination of many (Stallings, 2007). The common LAN configuration is one composed personal computers. This type is almost present in all organizations no matter the size is. The main reason for this may be because of lower cost and simpler topology. For smaller organizations, this type of network is perfect since it serves its purpose of connectivity without compromising budget and ease of use and maintenance. Another purpose of the network is for backend networks. Now this is more complex and is more commonly seen in bigger organizations. Backend networks serves as a connection between mainframes, super computers and mass storage devices. This implies that with a limited space and less equipment, the network is able to provide fast and reliable data transfer. This is essential for VLANs for companies that provide data services. The same applies to Storage area networks. With these functions, it is not surprising that the topology of the network will also grow more complex. If it were a simple LAN, there shouldn't be a problem. But since a VLAN involves more strategic planning, a lot more effort should be made. Although the physical location of the entities connected is not considered in the planning, how they are connected to each other can be pain staking. The interoperability of these entities can also cause errors. It is necessary that they operate on the same protocol. Existing hardware may not operate with newer ones or equipment from different manufacturers may clash. Based on the above disadvantages, it can be said that managing such network is a lot difficult than a simple LAN. Except for the geographical location, the hardware used for VLANs are not that different from a LAN, although there are routers and switches designed specifically for VLANs. Cisco calls these switches Catalyst. There are also route switch modules for this purpose. Some of the switches have built-in support in software and hardware to do inter-VLAN routing. With inter-VLAN routing, no external device, modules, or daughter cards are required (Cisco). Switches are more commonly used because they are simpler compared to that of a router which functions more like a connection to the internet or a WAN (Tyson, 2009). Security is improved by using switches with built in layer 2 protections such as hardware firewalls. This is then supported by it software counterpart. In the case of connecting several VLANs to each other, routers and bridges can be used. Network switches operate at the layer two or the Data Link Layer of the OSI model. The layer two is the one responsible to provide the means to transfer data between network entities. This makes it vulnerable to attacks by hackers and the like. LANs often have confidential and mission-critical data moving across (Tomasi, 2004). This is easily intercepted since it is right next to the physical layer of the network. VLANs have the advantage to making the network more secure since it segments the network into distinct broadcast groups (Long). Since the information is no longer sent to all when broadcasted, the probability of interception is reduced. In context of the protocols used for VLAN, there are several to choose

Urban Water Quality Issues Assignment Example | Topics and Well Written Essays - 500 words - 242

Urban Water Quality Issues - Assignment Example An instance where referencing will be essential in technical writing is in research dissertations in order to indicate the historical backgrounds of different water elements and water quality issues. This analyzes the previous researches that were undertaken by some engineers in a similar field to prove or reject the claims presented. Referencing in technical writing will also apply in transaction documents issued to supplier or vendors of engineering materials. Similarly, engineers normally enter into contracts with other parties and this requires legal interpretations of the phrases used in the documents (Jaffe & Trajtenberg, 2008). It is essential to ensure that the contract provisions conform to the laws by indicating the correct sections through credible references.ABC Company requested the submission of a report concerning urban water quality issues in which the findings by various researches indicated that the activity would be successful. Regnery, et al (2013), claim that urb anization has affected the quality of water due to factors like population growth, urban runoff, and sewage overflow. It is apparent that the high number of residents within the urban centers has contributed to developments that affect the drainage systems. Such constructions spoil the water resources because the water supply cannot serve the high population (Regnery, et al., 2013). Â  This leads to the shortage of water within the areas and the residents are forced to use untreated water from other sources. The author also indicates that urban runoff and sewage overflows sleeps water downhill to other areas, causing flooding and blockages.

Neighbourly Relations Essay Example for Free

Neighbourly Relations Essay Examine the argument that neighbourly relations are characterised by friendly distance. Neighbourly relations are an aspect of life which affects every single one of us at some point in our lives. When we look to live somewhere we not only consider the property and general area, but are also curious about our neighbours. A common question when viewing a property is ‘what are the neighbours like? ’ and the answer is usually ‘they are really nice’ whether they are or not! But what makes a good neighbour? Some people get on with their neighbours but just as many don’t and usually it’s due to what can appear as trivial disputes. This essay will look at the term ‘friendly distance’ which plays a huge part in how neighbours interact with each other. Many studies have asked the question ‘what makes a good neighbour? ’ and social scientists have found that despite different back grounds or settings the majority of people want the same set of standards from the people living near or around them. People need to be friendly and be there for each other but at the same time respect each others’ ‘need for privacy and reserve’ (Willmott. , cited in Byford, 2009, p. 253). So you have to be friendly but keep your distance at the same time. So how do we do this? Neighbouring relations comes with it’s own set of unwritten rules. These rules are constantly being portrayed and carried out in our day to day lives subconsciously. A 2004 study carried out in Manchester neighbourhoods further shows that this is a widespread practice. Neighbours of various areas demonstrated similar actions and practices of what is expected from neighbours, a common one being that they will chat with their neighbour when they are outside of the house if they see them but wouldn’t they wouldn’t go in each other’s house (Harris and Gale, cited in Byford, 2009, p. 55). This type of understanding of what is expected of a neighbour is also echoed in another study where neighbouring is seen as an ‘occasioned activity’ (Laurier et al. , cited in Byford, 2009, p. 256). This study showed that whilst neighbours can exchange pleasantries quite happily with one another if they meet in a public place, they would only directly go to the neighbours house and ring their door bell if there was something specific they wanted of if something was wrong. Although similar studies were carried out in the USA and findings were very much the same as the UK, other countries and cultures can be quite different. In 1970, the anthropologist Stanley Brandes visited Spain to study how modernisation and urbanisation affected small rural communities there. He resided in the village of Becedas and observed the daily life of it’s residents. What he found there was quite different to the UK, in that neighbours would enter each other’s houses without knocking or a second thought. They introduced themselves immediately by name and offered their help and went out of their way to make Brandes feel welcome. (Brandes, 1975, cited in Byford, p. 260). But as Brandes resided there longer he came to understand that what appeared at first as welcoming and friendly practices, it actually belied a community that in reality was quite mistrusting and critical of each other. Privacy was not seen as necessary and someone who required it would be considered rude and impolite. The poor status of the village meant that the villagers relied on each other for daily help with manual labour and other traditional activites. Without each other they felt they couldn’t surive even, but this high dependence on each other masked the underlying feeling of distrust they had for each other. But what about when neighbouring goes wrong? As human beings we can’t get it right all the time and relations can break down leading to disputes and disagreements. Noisy neighbours is a common complaint and one that is suffered more commonly in overcrowded housing estates where insulation is poor. This in turn leads to a lack of privacy and leads to a neighbours making adjustments within their daily life to prevent embarrassment of being overheard. These adjustments can referred to as ‘distancing mechanisms’ (Bourke, 1994, cited in Byford, p. 266). Such adjustments could include turning the bed away from the adjoining wall, and other ways of preventing noise from being heard. So although people can do what they like in their own homes, they are expected to take necessary steps to minimise what other’s can hear. Another much more serious example of neighbourly relations going wrong is exhibited within the cases of the murders of Catherine Genovese and James Bulger. Although neighbours assume they offer security to one another and ‘look out for each other’ (Attwood et all. , cited in Byford, p. 271) the public exposure of both the above cases uncovered a massive breakdown in neighbourly relations. In both cases a large number of residents heard screams, or observed unusual behaviour which left them concerned but they failed to do anything. A number of studies were carried out to study ‘bystander intervention’ to determine why these people didn’t help. One study carried out showed that if one person helps out then nother may do as well, but people are led by each other’s actions (Latane and Darley, cited in Byford, p. 279) and this was referred to as the ‘bystander effect’. In another study by Levine (1999) he found that the percieved relationship between the three boys in the Bulger case led to the reason why no-one intervened. People failed to get involved because they assumed the boys were all brothers and it was nothing to do with them. As neighbours we commonly share a social identity, or even a collective identity through our relationship with each other. This shared identity should profer a loyalty to each other as people within a shared group usually ‘stick together’. However, it would seem neighbourly relations are alot more complex than merely a shared identity. Neighbouring practices are carried out without thinking within our normal day, and these practices allow us to manage the fine line of private and public space. Neighbourhood life is ordered and defines how people should live together, and go about their daily lives without interfering but also by being there for each other too.

René Descartes Essay Example for Free

Renà © Descartes Essay Philosophy begins as an art of wondering. This art of wondering, leads man into asking a number of questions about himself and the world around him. Variations in philosophical thoughts as result questions posed by man, help in modification of philosophy. The purpose of this essay therefore, is to do a comparative analysis of Sophie’s World by Josteen Gaarder with three philosophical texts: George Berkeley’s Treatise on Human Knowledge, John Locke’s Essay on Human Understanding and Rene Descartes’ Passions of the Soul. We shall also show the roles of authors and texts in Philosophy. TREATISE ON HUMAN KNOWLEDGE VERSUS SOPHIE’S WORLD One of the outstanding efforts of Berkeley in this work was to show that the world exists as it does because of the ideas perceived by the mind of God and as such, existence of things depends on their perception through the senses. Likewise in Sophie’s World, Aristotle through his belief showed a similarity with Berkeley’s stance in this text Treatise of Human Understanding. For Aristotle, highest degree of reality is what we perceive with our senses. Berkeley also said that existence is the state of being perceived by a perceiver, but on the contrary, Descartes in Sophie’s World believed that he exists because he thinks. It furthermore means that his existence depends on his ability to think. He used such words like cogito ergo sum (latin) and je pense, donc je suis (French) all meaning `I think therefore I am` to illuminate his thesis on this. Plato while stressing the sovereignty of reason in Sophie’s World said that the reason can only give us the true reality of things and as such contradicted the empiricist approach of Berkeley. ESSAY ON HUMAN UNDERSTANDING VERSUS SOPHIE’S WORLD John Locke illuminated in this work that idea is derived from experience of sensation or reflection, just like it reflected in Sophie’s World in which his fellow empiricists likewise stressed the inevitability of experience as the source of true knowledge. David Hume in particular established that man has two types of perceptions, namely: impressions and ideas. By `impressions` he means the external sensations of reality. By `ideas` he means the recollections of such impressions. Aristotle the trail blazer of empiricism, in alignment with the empiricists believed our reason to be completely empty until we have sensed something. John Locke in this book made an attempt to refute the notion of `innate ideas` by proving that it does not exist, whereas in Sophie’s World, philosopher like Plato believed in an innate idea, an external world of ideas outside of the natural world. Descartes even believed that the idea of God is innate. PASSIONS OF THE SOUL VERSUS SOPHIE’S WORLD Descartes defined passions of the soul as a mental state or thought that arises as a direct result of brain activity and such passions can move us to action. He also suggested that one needs to learn to control one’s passions, for they can move one to perform vicious acts. Benedict Spinosa in Sophie’s World, suggested that we must free ourselves from our feelings and passions only then shall we find happiness. Conversely, also in Sophie’s World, the Epicureans through the teachings of Aristippus believed that the aim of life is to attain the highest possible pleasure or passions and by so doing, they contradict Descartes belief. AN EYE ON THE ROLES OF AUTHORS AND TEXTS IN PHILOSOPHY Authors in philosophy play incredible roles in modification of philosophy through their texts. There various attempts to answer the underlying questions of nature and man have led to the developments of dialectical methods like thesis, antithesis and synthesis used in philosophy today. An eye on the three authors and philosophers: Descartes, Berkeley and Locke whose works where compared with Sophie’s World above showed the vital role they played in philosophy. While Descartes was a rationalist, Berkeley and Locke were empiricists, but through their texts, they contributed in `epistemology` or theory of knowledge. CONCLUSION Having done these comparisons, we can see the successful deduction of similarities and differences between the Sophie’s World and three aforementioned philosophical texts. I attest that Sophie’s World is necessary philosophical paraphernalia needed by a neophyte in Philosophy as seen from its versatility in the course of this comparison done, and also how it covered aspects of history of Philosophy in such a sublime manner. POPE JOHN PAUL II MAJOR SEMINARY OKPUNO, AWKA NAME: UMENABA BENJAMIN C COURSE: INTRODUCTION TO PHILOSOPHY COURSE CODE: PHIL 101 REG NO: PJPS/NAU/013/O69 LECTURER: REV. FR DR. AUGUSTINE OBUROTA TOPIC: A COMPARATIVE ANALYSIS OF SOPHIE’S WORLD WITH THREE PHILOSOPHY TEXTS WITH AN EYE ON ROLES OF AUTHORS AND TEXTS IN PHILOSOPHY DATE: 28TH NOVEMBER, 2012 OUTLINES INTRODUCTION TREATISE ON HUMAN KNOWLEDGE VERSUS SOPHIE’S WORLD ESSAY ON HUMAN UNDERSTANDING VERSUS SOPHIE’S WORLD PASSIONS OF THE SOUL VERSUS SOPHIE’S WORLD AN EYE ON THE ROLES OF AUTHORS AND TEXTS IN PHILOSOPHY CONCLUSION.

Differences of Liberal and Conservative Views on Social and Economic Issues

Differences of Liberal and Conservative Views on Social and Economic Issues Political intolerance: Liberals and conservatives on social and economic issues. Abstract: In recent studies liberals and conservatives have been shown to express equal amounts of intolerance towards groups with dissimilar ideologies (Brandt et al., 2014; Crawford et al., 2017). This goes against decades of studies that show that conservatives express higher levels of intolerance compared to liberals (Sibley and Duckitt, 2008). This study explores reasons why recent studies have adopted a better methodology and issues with the vast sum of previous studies. We test participant’s intolerance towards groups that have political ideologies both similar and dissimilar to their own. The results show mixed evidence both supporting and not supporting the intolerance equality claim. We look at reasons why this could be the case and present an improvement for future studies. Introduction: Conservative political ideologies has for decades been linked to higher levels of intolerance and prejudice compared to opposing liberal political ideologies (Sibley & Duckitt, 2008). This has created the idea that liberals are also therefore more tolerant and express less prejudice. This has resulted in what looks like a ‘prejudice gap’ between the two ideologies (Farwell & Weiner, 2000). Recently these finding have been brought into question. New studies support that both conservative and liberal ideologies are equal in intolerance and prejudice, thus disproving the prejudice gap, towards views that don’t match their own.   This study explores the relationship between an individual’s political ideology and their intolerance towards an out-group. Intolerance and prejudice are closely related. Intolerance is the unwillingness to accept views, beliefs, or behaviour that differ from ones own. Prejudice is a preconceived opinion that is not based on reason or actual experience. One issue with previous studies is that they focused around minority groups such as African Americans, homosexuals and immigrants (Sears & Henry, 2003; (Terrizzi, Shook, & Ventis, 2010; Meertens & Pettigrew, 1997). These minority groups tend to have a bias towards liberal political ideologies. This is crucial in recognising as it shows that these types of studies focus on tolerance demonstrated by liberals and conservatives towards mostly liberal groups. The current research that has demonstrated that liberals and conservatives show equal amounts of intolerance have done so by exploring the tolerance of conservatives and liberals towards both liberal and conservative groups. It was found that liberals and conservatives express negative prejudices towards groups whose values are different from their own (Morgan, Mullen, & Skitka, 2010). In addition people who had conservative or liberal views even tended to prefer to distance themselves from others who did not share similar views (Skitka, Bauman, & Sargis, 2005). One study that explored this concept developed the ideological conflict hypothesis (ICH) (Brandt et al., 2014). The ICH proposes that people of different political views are willing to express intolerance and prejudice towards political ideologies that are not similar to their own.   The ICH proposes that conservatives and liberals engage in tactics such as motivated information processing and defence against worldview-violating groups to defend their ideologies. Motivated information processing is when an individual is selective about information they process. Individuals will take in information that supports their worldview while filtering out and ignoring information that conflict with their worldviews, (Kunda, 1990). Research has shown that both liberals and conservatives engage in motivated information processing when presented with an opposing political ideology (Bartels, 2002; Crawford, Jussim, Cain, & Cohen, 2013). Defence against worldview-violating groups is the need to maintain a constant worldview. This wanting of a constant worldview leads to increased intolerance towards groups whose ideologies are dissimilar to the individuals (Chambers & Melnyk, 2006). Studies have shown that both conservatives and liberals share the same level of intensity in regards to their ideologies (Skitka & Bauman, 2008). Building on from ICH one study proposed a theory of multi-dimensional ideological conflict (Crawford et al., 2017). Previous research in this area tends to treat political ideologies as a single dimension; a subject is either liberal or conservative (Jost et al., 2003) meaning the concept of ideological conflict only had one dimension to it. However this not the case, as there is growing evidence to support that there is more then one dimension to an individuals political ideologies (Crawford et al., 2017); that is a person may have a conservative view in one area and a liberal view in another, each view is a dimension. Collectively these dimensions create the persons worldview and ideology, however they are not longer belonging to just one group, conservative or liberal. This study looked at social and economic ideologies. Social ideology tends to refer to issues regarding personal freedoms (abortion, same-sex marriage etc) with conservatives tending to favour greater restriction and liberals favouring fewer restrictions in these areas. Economic ideology tends to refer to matters evolving the economy, with conservatives favouring less government regulations and liberals favouring greater government regulation. This study found two interesting patterns; the first is that it found support for ICH. That is both conservatives and liberals showed equal levels of intolerance towards views that were dissimilar to their own. The second finding was that liberals and conservatives, while still showing equal levels of intolerance, reported to have higher levels of conflict towards social ideologies compared to economic ideologies. Evidence supporting this notion suggest that a persons position on social issues more strongly labels them as a liberal or conservat ive compared to their views of economic issues (Feldman & Johnston, 2013), allowing for a greater intensity of conflict to arise when presented with dissimilar social ideologies compared to economic ideologies. Recent studies are pointing towards two new developments in the understanding of political ideological conflict. The first is that individuals that are conservative or liberal will express equal levels of intolerance towards groups or ideas dissimilar to their own (Brandt et al., 2014). The second is that individuals can have both conservative and liberal views at the same time, but belonging to different dimensions (Crawford et al., 2017), such as social or economic. In addition to this the level of intolerance/conflict expressed is higher for social issues compared to economic.   Ã‚   This leads to this studies hypothesis, it is expected that the results will support ICH, that being that both liberal and conservative participants will show equal levels of intolerance towards groups with dissimilar political ideologies. Additionally it is expected to see higher levels of intolerance/conflict in the social dimension then the economic dimension. Discussion: In this study we explored the intolerance levels of participants who held conservative/liberal views towards groups of both similar and dissimilar views on social and economic issues. The results both supported and did not support our hypotheses. In the social domain test we found evidence in favour of our hypothesis, however in the economic domain we found evidence that contradicted our initial hypotheses. In the social domain, our findings supported our first hypothesis; participants were found to show equal levels of intolerance towards social ideologies that were dissimilar to them. This supports the ideological conflict hypothesis (Brandt et al., 2014). As the ICH states, the possible reasons for the results found in this study is due to motivated information processing (Kunda, 1990) and defence against worldview-violating groups (Chambers & Melnyk, 2006; Skitka & Bauman, 2008).   This states that when liberals or conservative form ideas on a group with political ideologies not similar to their own, they are likely to form ideas that confirm their current ideology, this typically leads to the individual forming negative views towards groups of dissimilar ideologies. This is appropriate as this study presented randomly assigned participants to an out-group with randomly assigned political ideologies, meaning that participants would either be paired to an out-group that had similar or dissimilar political views. Additionally to this finding, it was noted participants showed higher levels of tolerance towards groups who shared similar political ideology. This provides additional evidence in favour of the ICH, as it is expected that when a participant is presented with a similar view to their own, they should express less intolerance. The question this brings up however is why our findings matched ICH and not the vastly large collection of studies that found conservatives to be more intolerant (Sibley & Duckitt, 2008). This is explained through the methodology of this experiment. Unlike the majority of studies conducted in the meta-analysis (Sibley & Duckitt, 2008), this studied looked at the intolerance towards groups that held both liberal and conservative views. Previous studies tended to only look at the intolerance towards groups who are easily associated with liberal views (Sears & Henry, 2003; (Terrizzi, Shook, & Ventis, 2010; Meertens & Pettigrew, 1997). This experiments methodology closely matched (Brandt et al., 2014) which provides reasoning behind why the results ended up supporting ICH over the vast majority of studies conducted. However due to the large volume of studies against our hypothesis, it’s important to properly address this. A large proportion of social and political psychologists id entify as a liberal with mostly liberal values (Inbar & Lammers, 2012). As ICH would predict, these liberal researchers could be experiencing motivated information processing and defence against worldview-violating groups. One study found that liberal psychologists tended to investigate topics that are of greater importance to liberal ideology (Mullen, Bauman, & Skitka, 2003). So while not discrediting these previous studies, there is evidence supporting a bias within them. This provides further evidence to why our study did not reproduce their results as well as why it is okay that it didn’t. In the economic domain, our findings did not support our first hypothesis, and gave weak evidence towards our second hypothesis. The first hypothesis that this goes against is that both liberals and conservatives will express equal levels of intolerance. Our findings show that conservatives have a much greater intolerance towards groups with dissimilar economic ideologies. The second hypothesis was that social domains would show a higher level of conflict compared to the economic domain. While this remains true for liberal participants and conservatives presented with a conservative out-group. Conservatives presented with an economically liberal out-group demonstrated a much higher level of intolerance, which goes against our second hypothesis. This could be explained if there was a skew in our sample size, this being more liberals then conservatives or vice versa. This leads to one possible error in this study, a sample bias. The target group in this experiment was university studen ts with an average age of around 21-22. One Australian poll found that for the ages of 18-24 and 25-34, political groups with liberal ideologies (e.g. labour party and the greens) dominated over the conservative Australian liberal party (Roy Morgan, 2017). This brings up one issue with the experiment conducted, that is that we did not take into account the number of liberals compared to conservatives and thus over-looked the possibility for a sample skew. If there was a skew in the political identities of participants (favouring liberals) one reason for higher intolerance could be explained according to political conformity (Cohen, 2003). In an age group with a majority of liberal minded individuals, an individual needs to have strong belief in their ideologies to not conform politicly to the majority. So if there was a skew and the people who identified as conservative had strong conservative ideologies, this would example why results showed conservatives more intolerant in economi c domains. Further research is needed where the sample size is correctly identified and taken into account. In conclusion this study found evidence that both supported and did not support our hypotheses. Over the social domain we see evidence of ICH however this is not seen in the economic domain. This could be due to a sample bias that was not taken into account by researchers. Future studies, which control and take into account any sample biases, are needed. References Bartels L. M. (2002). Beyond the running tally: Partisan bias in political  Ã‚   perceptions. Political Behavior, 24, pp.117–150. Brandt, M., Reyna, C., Chambers, J., Crawford, J. and Wetherell, G. (2014). The Ideological-Conflict Hypothesis.  Current Directions in Psychological Science, 23(1), pp.27-34. Chambers, J. and Melnyk, D. (2006). Why Do I Hate Thee? Conflict Misperceptions and Intergroup Mistrust.  Personality and Social Psychology Bulletin, 32(10), pp.1295-1311. Cohen, G. (2003). Party Over Policy: The Dominating Impact of Group Influence on Political Beliefs.  Journal of Personality and Social Psychology, 85(5), pp.808-822. Crawford, J., Brandt, M., Inbar, Y., Chambers, J. and Motyl, M. (2017). Social and economic ideologies differentially predict prejudice across the political spectrum, but social issues are most divisive.  Journal of Personality and Social Psychology, 112(3), pp.383-412. Crawford, J., Jussim, L., Cain, T. and Cohen, F. (2013). Right-wing authoritarianism and social dominance orientation differentially predict biased evaluations of media reports.  Journal of Applied Social Psychology, 43(1), pp.163-174. Farwell, L. and Weiner, B. (2000). Bleeding Hearts and the Heartless: Popular Perceptions of Liberal and Conservative Ideologies.  Personality and Social Psychology Bulletin, 26(7), pp.845-852. Feldman, S. and Johnston, C. (2013). Understanding the Determinants of Political Ideology: Implications of Structural Complexity.  Political Psychology, 35(3), pp.337-358. Inbar, Y. and Lammers, J. (2012). Political Diversity in Social and Personality Psychology.  SSRN Electronic Journal. Jost, J., Glaser, J., Kruglanski, A. and Sulloway, F. (2003). Political conservatism as motivated social cognition.  Psychological Bulletin, 129(3), pp.339-375. Kunda, Z. (1990). The case for motivated reasoning.  Psychological Bulletin, 108(3), pp.480-498. Meertens, R. and Pettigrew, T. (1997). Is Subtle Prejudice Really Prejudice?.  Public Opinion Quarterly, 61(1, Special Issue on Race), p.54. Morgan, G., Mullen, E. and Skitka, L. (2010). When Values and Attributions Collide: Liberals’ and Conservatives’ Values Motivate Attributions for Alleged Misdeeds.  Personality and Social Psychology Bulletin, 36(9), pp.1241-1254. Mullen, E., Bauman, C. and Skitka, L. (2003). Avoiding the Pitfalls of Politicized Psychology.  Analyses of Social Issues and Public Policy, 3(1), pp.171-176. Roy Morgan. (2017).  L-NP (51%) takes the lead over ALP (49%) with only 3 weeks to go. [online] Available at: http://roymorgan.com.au/findings/51115-morgan-poll-august-19-2013-201308181432 [Accessed 1 Oct. 2017]. Sears, D. and Henry, P. (2003). The origins of symbolic racism.  Journal of Personality and Social Psychology, 85(2), pp.259-275. Sibley, C. and Duckitt, J. (2008). Personality and Prejudice: A Meta-Analysis and Theoretical Review.  Personality and Social Psychology Review, 12(3), pp.248-279. Skitka, L. and Bauman, C. (2008). Moral Conviction and Political Engagement.  Political Psychology, 29(1), pp.29-54. Skitka, L., Bauman, C. and Sargis, E. (2005). Moral Conviction: Another Contributor to Attitude Strength or Something More?.  Journal of Personality and Social Psychology, 88(6), pp.895-917. Terrizzi, J., Shook, N. and Ventis, W. (2010). Disgust: A predictor of social conservatism and prejudicial attitudes toward homosexuals.  Personality and Individual Differences, 49(6), pp.587-592.

Java vs C :: Essays Papers

Java vs C Java vs. C++ papers = Since their inception, computers have played an increasingly important role in today’s society. Advancements in technology have enabled computers to become faster and cheaper. Today, the majority of families own a home computer that is vastly more powerful than giant mainframes of years gone by. Computer hardware has been evolving rapidly with no end in sight, and with all of the advancements in computer hardware come advancements in computer software; gone are the days when FORTRAN and COBOL were the languages of choice. Today, vvv two hot new object oriented programming languages have entered the computer programming arena, Java and C++, this paper will examine the similarities and differences between these new languages. Both Java and C++ are object oriented programming languages, but what does that mean? Object oriented programming (OOP) emphasizes data, instead of algorithms for solving problems. Instead of trying to fit a problem to the procedural a pproach of a language, OOP attempts to fit the language to the problem, in other words, OOP is structured to produce an answer without changing the question. Object oriented programming involves two separate parts, class and objects. Class is a specification that describes a new data form, it is a template that defines how an object will look and behave.(Kaj 1996, 8) An object is that particular data structure constructed using the parameters defined by class.(Prata 1995, 5) The object oriented programming approach to program design is to first design classes that accurately represent those things with which the program deals. A drawing program, for example, might define classes to represent rectangles, lines, circles, brushes, pens, and the like. The class definitions, recall, include a descriptions of permissible options for each class, such as moving a circle or rotating a line.(Prata 1995, 5) The main advantages of OOP, besides being able to create more complex software, and dev elop answers without changing the questions, are numerous. OOP facilitates creating reusable code, which can save a lot of work. Information can be hidden to safeguard data from improper access. Polymorphism lets the programmer create multiple definitions for operators and functions, with the programming context determining which definition is used, also Inheritance lets the programmer derive new classes from older ones. When using OOP, the programmer can focus on representing concepts, instead of concentrating on tasks. (Prata 1995, 6) Java, although in many respects similar to C++, is actually just a more simplified version of the latter.

The Requirements for Developing and Managing a Comprehensive Management

The Requirements for Developing and Managing a Comprehensive Management Information System The aim of this assignment is to see the requirements for developing and managing a comprehensive Management Information system for an organisation. In today's business environment it is getting harder and harder for organisation’s to not only survive but to compete against other organisation’s. Information technology plays a big part in helping companies compete and survive. Companies that have branches or franchises need to make sure that they can communicate with the head office so that orders can be passed down. Most of a mangers time is spent 1 Passing information and ideas upwards to senior management to aid their decision making 2  Ã‚  Ã‚  Ã‚  Ã‚  Providing other department managers with information which will help them do their jobs more effectively 3  Ã‚  Ã‚  Ã‚  Ã‚  Passing information down wards to subordinates 4  Ã‚  Ã‚  Ã‚  Ã‚  Conveying attitudes or creating them 5  Ã‚  Ã‚  Ã‚  Ã‚  Receiving and interpreting facts and data 6  Ã‚  Ã‚  Ã‚  Ã‚  Communicating with people out sides the company e.g. suppliers. The manager needs resources to aid him with the task mentioned above. Management information systems and decision support systems are two such resources. Computers and information systems play critical roles in the operation of most organisations. All organisations, from factories to banks, are highly dependent on information for their day-to-day operations. The vast quantity of information that large corporations and government agencies need to operate, and the speed with which that information is created and used, makes computer-based information systems critical to such operations. What is a Management Information System? There are different definitions of a management information system: â€Å"Management Information system products produce information products that support many of the day-to-day decisions –making needs of management. Reports, displays, and responses produced by such systems provide information that managers have specified in advance as adequately meeting their information needs.† Taken from Management Information Systems Third edition by James A. O’Brien PG 370 â€Å"Management information system can be defined as a network of computer based processing procedures that are integrated with manual and other procedures to provide timely, effective information to support managerial planning ... ...and System Usage", INFOR, Vol. 28 No. 2, May 1990, pp. 89-101 Burrell, G. and G. Morgan, "Sociological Paradigms and Organizational Analysis", Heinemann Press, London, Chismar, William G. and Charles H. Kriebel, "A Method for Assessing the Economic Gallagher, Charles A., "Perceptions of the Value of a Management Information System", Academy of Management Journal, Vol. 17 No. 1, 1974 Hirschheim, Rudy and Heinz K. Klein, "Four Paradigms of Information System Development", King, William R. and Jaime I. Rodriguez, "Evaluating Management Information Systems", MIS Quarterly, September Lee, Allen S., "A Scientific Methodology for MIS Case Studies", MIS Quarterly, March Lucas, Henry C., "Performance and the Use of an Information System", Management Science, Vol. 21 No. 4, April 1975, pp. 908-918 Melone, Nancy Paule, "A Theoretical Assessment of the User Satisfaction Construct in Information Systems Research", Srinavasan, A., "Alternative Measures of System Effectiveness: Associations and Implications", MIS Quarterly, September Weill, Peter, and Margrethe H. Olson, "Managing Investment in Information Technology: Mini Case Examples and Implications", MIS Quarterly, March

Moving Away from Home Can Be Astessful Experience for Young People

Moving away from home can be a stressful experience for young people Nowadays, many young people don’t want to live with their parents because they think if they live along, they can do whatever they want. But maybe few months later, they will find some problems that they never know how to do before because their parents always do everything for them when they are at home. At that time, they will feel stressful. However, I think it’s a good way to teach them how to live by themselves, especially for teenagers. They can’t be dependent on their parents all of their life so they have to learn many things and do many things by themselves. Moving away from home not only can be a stressful experience for young people but can also be a good way to let them learn how to become independent. The other reason that young people will feel stressful when they move away from home is they don’t know many people in the new place or even they don’t know anyone there. When they have something they can’t solve, they don’t know they can ask who or who can help them. They will feel so lonely and upset in the beginning, especially for someone who has nothing is smooth. In conclusion, moving away from home is a stressful experience for young people but also it is a helpful experience to them because they can learn many things by this kind of experience.

Memoirs of a Geshia and Andrea Del Sarto Essay

The film adaptation of Memoirs of a Geshia faithfully depict the context in which it was taken. Woman are portaryed strong feminists in today’s society. Sayuri’s blue eyes symbolise the Japanese culture, as the element of water is often associated with adoption and change, as it can be both a relaxing and a desructive force. Sayuri’s growth from a young servant to one of the most sought after geshia in her district â€Å"water is a good guard against fire. Sayuri is portrayed as being a worthy protective for the equally formidable element of fire which can be associated with the beautiful but highly dangerous Hutsumomo. Both â€Å"woman of fire† and the â€Å"girl of water† illustrate the dominance and power of women in today’s society. as both characters were associated with the element of earth, emphasising the power of women in today’s society as they have gained power over time. On the other hand, in Andrea del Sarto, Browning rejects the tendency rejects the tendancy of romantics to project all their desires onto a female object . His dramatic monolouge in the poem is a variation on the theme of men processing women as objects, â€Å"You beatiful Lucrezia that are mine! † reveals the artist’s desire to assert his male dominance over her female passivity. Browning showcases the role of women during the Victorian era and the time as men only refer to them as objects as they were only desired by men for their â€Å"perfect eyes†¦ perfect mouth†¦ â€Å"over time women have become more powerful as portrayed in Memoirs of a Geshia as the society has recognised and potential of women.

Outline of the Nayar of India Essay

The Nayar are a matrilineal society that resides in southwest India. They have a unique social organization and culture. Their extended family is among foraging bands, and are formulated of a nuclear family is the basic unit of production and consumption. Culture and religion is one that is serious and all people living under the political jurisdiction are required to follow the state religion. When it comes to kinship, class prearranges children marriages in order to maintain land, wealth, and power within the group. There is still division between the roles between men and women. Men still considered women, inferior and restricted to the household and men are superior and more intelligent. Today life for the Nayar of India is changing the roles of men and women, with technology rising in communities and becoming more educated women are now leaving their homes for employment. As times change with new technology, the people of Nayar never forget the importance of religion and family. I. Beliefs and Values 1. Family 2. Culture 3. Religion II. Kinship 1. Children 2. Ownership of land 3. Marriages III. Gender Relations 1. The roles between men and women 2. Duties portrayed as a community 3. Changes in gender responsibility References: NAYAR FAMILY AND KINSHIP: A STUDY IN CHANGE AND CONTINUITY http://www.isec.ac.in/Nayar_family_and_kinship_A_study_in_change_and_continuity. Pdf Nowak, B., & Laird, P. (2010). Cultural Anthropology. San Diego, CA: Bridgepoint Education. Religion and International Relations http://site.ebrary.com.proxy- library.ashford.edu/lib/ashford/search.action?adv.x=1&p00=Nayar+of+India

Television Broadcasts Limited

Television Broadcasts Limited, commonly known as TVB, is the first wireless commercial television station in Hong Kong. It was first established on 19 November 1967 with only about 200 staff. The Group has now grown to a size of about 4,200 including contract artistes and staff in overseas subsidiary companies. The major activities of TVB are television broadcasting, programme production and other broadcasting related activities such as programme licensing, video distribution and satellite broadcasting etc.It transmits over 17,000 hours of programming on its Chinese Jade channel and English Pearl channel free of charge to 2. 34 million homes in Hong Kong. It is one of the largest producers of Chinese language programming in the world. Many of the Chinese programmes are dubbed into other languages and are distributed to more than 40 countries and cities, accessible to over 300 million households. During the prime time viewing hours, the Chinese Jade Channel and English Pearl Channel a chieve a remarkable average of 87% and 80% of Hong Kong’s television audience share respectively.To cope with future development, the Company invested HK$2. 2 billion in the construction of a new state-of-the-art TVB City in Tseung Kwan O Industrial Estate. The management and production facilities, with a building area of over 110,000 sq metres, 30% more than the TV City at Clear Water Bay Road, came into full operation in October 2003. There are two outdoor shooting locations and 22 production studios in TVB City. The new TVB City is fully digitized to enhance its services to the public.On 31 December 2007, TVB officially launched its 24-hour HD channel, HD Jade, providing diverse and brand new audio/visual entertainment in the digital era. In addition to the simulcast of digital Jade and Pearl channel, TVB started operating J2 and iNews digital channels in June 2008 and January 2009 respectively. The Company has always been striving for excellence in serving the people of H ong Kong and its efforts are widely recognized. The Company, has thus received 450 international awards for its various television programming and programme promotions in the past.In 1997, TVB has also been awarded as one of Asia’s 50 most competitive companies; one of the top 20 companies in Hong Kong and one of the Asia’s 200 Leading Companies. In 2001, it was also awarded the National Association of Broadcasters (NAB) International Broadcasting Excellence Award 2001 for its outstanding contributions to the community. Now, let me sum up our proposal. Our mission is to develop a diverse development company. In the past, we have developed magazine industry, music industry, film industry and internet industry.In the future, we plan to develop agency industry, which are combine advertisements and sales. We plan to operate online sales thought the television and earn the commission. There are several reasons that can support our proposal to be a successful one. First of a ll, we have an excellent financial situation now and we have cash balance total HK$3,604 million in 2012. If the our proposal is implemented, more sponsorship in the clothing and jewelry of the TV series or some annual TV shows. It can decrease the cost of production. nline shopping become more popular, this development of this kind of business can really help the company to generate more earning. Secondary, TVB have already a huge fixed amount of audience and we believe that more audience will be attracted by the new scheme, which means that more customers are provided. Moreover, nowadays, online shopping has become a tendency in Hong Kong since it is convenient. When you are taking the train, on your way to work; or lying on the sofa, enjoy your weekend at home, you can watch our programs though your cell phone and TV.Our artists wear the fashion items that you want, you can only touch that item on the screen to get it. The details of the item will be shown after you touching the screen. If you decide to buy, you can add the item to your shopping bag and confirm you order. You can use any of the payment types listed on the screen to pay for your order, for example VISA, PAYPAL, AMERICAN EXPRESS. Your details are safe with us as we take security very seriously indeed. U may doubt that whether the proposal is feasible. It can surely give u an answer.Yes! We plan to cooperate with SONY to make the technology of touch screen can be perfected and fixed with this proposal. SONY which is an initiate company always seeks for a breakthrough has a strong technology to support us. It can match with the technology that our plan needs. TVB has been serving the audience for 44 years. It will continue to keep its promise, delivering excellence in programming and cutting-edge broadcasting technology to the people of Hong Kong and to Chinese communities around the world. umanitarian initiative Apart from fighting for greater profits, it is our obligation to perform our human itarian initiative. After shooting dramas, we can ask our clients for their clothes for charity sale. All income from charity sale will be donated to charities. Clothes which are abandoned can donate to charities as well. Our actors and actress are also willing to donate their clothes either for the charity sale or the charities. establish a new department in response for the agency job.

Quality Costs for Consideration Essay

Our firm is the producer of tangible products. We, as a company, must ensure that we are delivering the highest quality products to our customers to maintain a quality reputation and in order to earn repeat and referral business. We have identified the three types of costs associated with the implementation of quality considerations. We believe that if we are mindful of the following costs our quality will improve, our customer satisfaction will improve and our business will prosper. The three types of costs associated with quality considerations are prevention costs, appraisal costs, internal and external failure costs. Prevention costs are the most effective way to avoid unnecessary problems with production and sales quality. These costs are defined as any steps we as a company can take to pre-emptively avoid any future defects by providing our employees with things such as, proper tools to complete their assigned work, safe and proper working conditions, proper and effective train ing of all new employees and continual training and education for all existing employees, and by implementing quality control systems to ensure all products produced are up to the company’s and customer’s quality standards. Appraisal costs are the costs associated with the testing and inspection of purchased materials used in the productions process, inspection of the items the company is producing, checking items produced for conformance, quality control audits and field testing of items produced and the cost of the labor associated with all of these items. These costs are ultimately the quality costs resulting from quality control and while they may be high in numbers but are imperative during the manufacturing and production processes. Internal failure costs are the costs that we would incur should we fail to meet the quality standards of the products we produce. These costs encompass everything from the manufacturing of a defective product to the downtime resulting from a quality assurance problem. Scrap materials, defective and rejected products are some example of internal failure costs incurred from a lack of quality assurance. External failure costs are the result of internal failure costs that somehow escape recognition and end up with our customers. These costs are warranty repairs and replacements, lawsuits from defective or dangerous products, a loss of referral and repeat business as a result of a battered reputation and any recalls the company may have to endure because of faulty quality assurance; these costs will inevitably cause the most damage as our defective products have reached the product and that is where the problem is realized. The time, money and effort needed to overcome an external failure cost is astronomical and can even become a threat to the company’s very existence. An evaluation of these costs allows us to analyze the trade-offs for each and why it is so important for us, as a company, to maintain high quality control standards. Preventative costs may be substantial to the company during the initial implementation period because the company may have to update equipment or hire appropriate training managers for our employees but we believe that if we implement these preventative measures the benefits will far outweigh the costs for the company. The tradeoffs if we decide not to take preventative measures we will be opening our processes up for internal failure which will result in lost time, wasted product and unhappy customers from late deliveries. We believe this cost will affect our employee’s morale and increase our costs overall for the reasons stated above which will deteriorate our margin. Appraisal costs may be numerous in the manufacturing industry and during the production process but the tradeoff for not implementing these appraisal costs is far too great to accept from a cost, benefit perspective. The tradeoffs for not implementing these costs are the use of bad raw materials during production resulting in poorly produced items, products that are not uniformly produced defective products which will ultimately be returned or worse cause harm to the distributor or even customer. We would lose business, lose referrals and possibly even lose suppliers if we do not implement appraisal procedures and we, as a company cannot afford liabilities that would be a direct tradeoff for not implementing appraisal costs. Internal and external costs, we believe, can be the end of the company if we do not take preventative action now. We leave ourselves open for litigation from faulty products that reached our customers and were injured, the cost of recalling faulty merchandise which requires us to pay for shipping and to replace any defective product that we sold. We also open ourselves up for public ridicule and loss of repeat and referral business from a battered reputation. For all these reasons we believe that the company needs to act now to implement a quality control system, implement preventative measures starting at the training phase of our new employees and monitor our output carefully by auditing our processes and products regularly to help us avoid internal failure and external failure costs as a company.

Jobs Roles In Latin America Article Example | Topics and Well Written Essays - 500 words

Jobs Roles In Latin America - Article Example Graduates in Latin America are earning an average salary of approximately $60000-90000 per year. Other engineering roles include chemical engineering, mechanical engineering, and civil engineering. Those entering an engineering job must have an engineering degree from a credible university. Furthermore, they must be approved by the engineering board. In addition, they must have an experience which varies with the country. This is significant in ensuring that they can be able to deliver high quality services. Countries with the most engineering jobs include Brazil, Mexico, Argentina, Colombia, Chile, and Peru. With the entry of the internet in the market, the number of computer programmers has increased tremendously. More firms are in need of various programs, an aspect that has increased the demand for the programmers. A computer programmer is required to have an IT degree. Although some employers require a bachelor degree in IT, some hire individuals based on their experience with an associate degree or certificate (Farr & Shatkin 2014). However, if one is planning to apply for a job in healthcare industry, it is advisable to expand the knowledge of that industry. Furthermore, specific programming languages are important. It is important for one to have experience, especially in a specialized field like computer programming. The computer sector is changing very fast. Therefore, being a programmer means that one has to keep on upgrading the education (Farr & Shatkin 2014). Countries with a high number of computer programmers include Brazil, Mexico, and Argentina. The business growth has been on an upward trend. To become a management consultant, one need to have an undergraduate degree in any business related course. Unlike other technical courses such as engineering, management consultant is a career that does not require specific skills. The skills varying depending on the service that one will offer. The experience required for one to become a

Week 2 Economics Essay Example | Topics and Well Written Essays - 750 words

Week 2 Economics - Essay Example In such a situation, an increase in price causes the revenue earned by suppliers to go up and vice versa. In contrast, the price elasticity is termed elastic whenever the change in demand of a quantity is greater in comparison to a change in price. in this situation, an increase in price causes the revenue to fall and vice versa. In a perfectly elastic situation, a change in price will cause demand to fall to zero thereby bringing the corresponding revenue to zero. However, when the situation resembles a perfectly inelastic curve, a change in price has no influence on the quantity demanded and the demand curve is a vertical line, which is in clear violation of the law of demand. In a perfectly competitive market, a number of producers are producing identical goods with no product differentiation. Therefore, a producer cannot set any price as desired as doing so would put them out of business due to availability of substitutes. Accounting profit is price minus costs for all processes that help bring a product or service to the market. Economic profit is the money earned by investor as a result of their investments. As such, it does not have anything to do with the way firms use that investment to produce goods and generate accounting profit. Economic profit can be negative even when accounting profit is in the green zone. Short term decision making is driven by the immediate demand and supply forced in the market to which the firm may not be able to make major investments or changes and may have to use present capacities to produce the maximum quantity. Long term decisions require time to implement and must be planned in advance taking the long term demand and supply into consideration. The combination of price and the production function gives the cost curve. The total cost curve is the amount spent on all fixed and variable costs while the

The Role of Emotionfocused Theory in Functional Assessment Essay

The Role of Emotionfocused Theory in Functional Assessment - Essay Example Johnson credits Fritz Perls with the experiential gestalt concept that is critical to EFT (Greenberg & Johnson, 2005; Johnson, 2003). In the experiential approaches, the goal of therapy is . . . to increase awareness of emotional experience so that it is available as orienting information in dealing with the environment, and to help clients become aware of and responsive to the action tendencies toward which feelings prompt them (Greenberg, 2006, p. 501). EFT involves the therapist's creative involvement with the clients in a manner in which the therapist moves the clients into a structure of therapy that progresses beyond simple construction. That is, although EFT initially very much outlines conflict struggles in the clients with simple terms and concepts to invite client acceptance of the problems, as therapy moves onward, painting pictures becomes more of the art of therapy (Johnson, 2003). Experiential theory incorporates the complete being of the client in the present here-and-now focus. Johnson observed that it is the exception rather than the rule to delve into deep unconscious experience or repressed memories, as there is plenty of substantial information right in front of the therapist's eyes (Johnson, 2003). The substance of EFT is the client, including what and how the client experienced communication in the client's senses, body, and expressions (Perls, 1969). The verbal communication is secondary to the therapist: Words can lie, but expression does not. EFT and Humanistic Theory After the first movement of psychodynamic psychology and the second movement of behaviorism, the third movement of humanistic psychology (later, Humanistic Existential) emphasizes in the client a potential capability toward "self-directed growth" (Corey, 2001, p. 205). . The therapist's belief that the client has both strength and desire to fulfil potentialities positively affects the client's progress: "Individuals have within themselves vast resources for self-understanding and for altering their self concepts, basic attitudes, and self-directed behavior; these resources can be tapped if a definable climate of facilitative psychological attitudes can be provided" (Rogers, 2001, p. 115). Thus, EFT adopts a therapeutic act of honoring the client as a unique human being (Greenberg & Johnson, 2005; Johnson, 2003). This empathic interaction increases a client's congruence, a term Rogers used to describe the incorporation of self and experiences as they become more similar, unitary, and true. EFT and Existential Theory Existential theory concerns itself with core structures of the self, including meaning, being, crisis, anxiety, freedom, responsibility, guilt, and death. While Johnson summarized the "I-thou" relationship, an existential concept from Martin Buber (Greenberg & Johnson, 2005; Johnson, 2003), she presented presumptuously existential concepts within the EFT theoretical framework. Studying the client from a phenomenological perspective embraces the assumption that the client is the expert in his or her world. The job of the client is to assist the therapist to enter that client's experiential world. As such, this position of the client enhances the qualities necessary for the therapist to be as accepting, nonjudgmental, and genuine as

Europe's Promise Essay Example | Topics and Well Written Essays - 1000 words

Europe's Promise - Essay Example Thus, while America has been instrumental in supporting the revolution and reestablishment of post world war II Europe, it is now emerging that another world power is developing. However, the difference between American as a superpower and the emerging Europe world power is that; Europe has collectively embraced all the social, environmental and economic strategies that will create an economic hub that is less prone to financial crisis, a social setting that affords social, cultural and welfare sustainability for its population, as well as an environmental focus that will enhance environmental sustainability (Hill, 43). Europe’s new promise is to develop a human society that has economic security and empowerment, and which has embraced global new vision for humans; the vision of wellbeing and comfort. The argument of the book is that the social capitalist approach is the best hope for the future generational stability in the world, as opposed to the pure capitalism approach ap plied by the United States, which has served to alienated its people since the end of the world war II, through creating a society that is lacking in equality and economic sustainability (Hill, 52). The consequence has been the creation of a society that is divided right through the middle, with a certain percentage of the American society joining the higher class, a class defined by immense wealth, while there is still another class on the bottom of the hierarchy that is poverty-stricken. The social and economic inequality has been contributed by the purely capitalist approach, which enables the rich and the owners of the factors of production to continuously enrich themselves, while the lower class of workers rarely gets an opportunity to move up the ladder (Hill, 117). It is such a system that has created an American society where the population obtains less for the value of their money, since when the costs of out-of-pocket services are combined with the taxes that the American pays, the value is equivalent with that of the European population, yet the value of the public services delivered to the Americans are much lower (Hill, 33). Therefore, the hope for the new and emerging democracies should lie on the constitutional reforms applied by the European nations, as opposed to the libertarian approach that is characteristic of the United States democracy. Further, the European healthcare and the social welfare systems are more efficient and effective in catering for the European vast population, compared to those of America, where the provision of healthcare is not equitable and universal, and thus there is no guarantee for the health welfare of the American population (Hill, 272). Additionally, the social welfare system of America is inequitable and does not take good care of the older generation, most of whom, are left to grapple with the problem of catering for their health services after retirement, considering that the social welfare system is not well integrated with the healthcare system, to ensure the holistic caring of the population. Similarly, the labor rights in the European countries are based on an equitable system

Article Review written by R. Eric Barnes Essay Example | Topics and Well Written Essays - 1250 words

Article Review written by R. Eric Barnes - Essay Example Barnes attempted to establish several arguments in justifying his claims, particularly by trying to inject conclusions with moral, legal and medical bases. He discussed the properties of THC and its various effects when used, and then claiming that the effectiveness of marijuana in terms of its medical effectiveness is not controversial by describing them as the positive its medicinal properties. He then argued that the controversial argument lies in its medicinal value. He deliberated that the medicinal value corresponds to a normative claim which is controversial due to its implications that the medical benefits will then be far greater than the medical cost such as the side effects as well as the implications that there are no treatments which can be used as alternative, and that will be preferable to use in its stead. He claimed that individuals have interests and rights to safe and effective medical treatments, justifying that rights are an important â€Å"prima facie† wh ich the government must respect as well as enforce, at the same, giving credit to aspects such as positive and negative rights, and then emphasizing his assumptions regarding the responsibilities and rights of the government in the regulation of the sales of this drug to ensure the safety of individual. Barnes tackled some options the federal government may undertake with regards to marijuana, some of which are the removal of marijuana from the list of controlled substances which would entail total freedom to purchase by any individual, another is removing the drug from schedule 1 of controlled substances and then moving it to the schedule 2 category. ... ch would entail total freedom to purchase by any individual, another is removing the drug from schedule 1 of controlled substances and then moving it to the schedule 2 category. He admitted that few options are available to state governments regarding this matter, as their authority, in reality, is supplanted by those of the federal government. He then tackled the issues for allowing the prescription of marijuana, claiming that the side effects of using this drug as a medicine is considerably less than other certain drugs that are currently being prescribed. He also claimed that a certain percentage of patients and doctors have an expressed desire towards its legalization for medicinal purposes. He claimed that marijuana is â€Å"effective, sufficiently safe and endorsed by a significant percentage of the relevant medical community†. According to Barnes, there is not enough reason to stop the government from allowing the legal prescription of marijuana, which then entails that it should allow doctors to do so, particularly to patients suffering from certain ailments. He then addressed several arguments that have been raised against the legalization of marijuana such as how the government should not allow harmful medications to be prescribed, discussing the grounds which have been used to justify this argument. He then addressed the second argument, which states that the government should not allow for the prescription of potentially harmful drugs that are not adequately tested, and tried to refute it be underlining the rapid growth of marijuana usage in the country over the past three decades and then emphasizing the need for legalizing further research and testing. The third argument Barnes tried to address is the practical problems associated the legalization of its

Community Health Assessment Assignment Example | Topics and Well Written Essays - 1500 words

Community Health Assessment - Assignment Example Cambridge Health Alliance (CHA) activities enhance health by collaboratively addressing community health needs. In Cambridge, there exist a strongly established healthcare tradition, community partners, providers and individuals focused at meeting the local healthcare needs. Cambridge is a home to several distinguished hospitals that are ranked top nationally. Medical practitioners occasionally react to quality reports with some bit of suspicion, concerning efforts to estimate quality as thinly cloaked efforts at marketing or cost reduction. Skepticism concerning quality reports is fostered by confusion arising from many report cards, which usually present a bunch of related clinical feedback combined with steps highlighting the use of resources. Nonetheless, medical practitioners should acknowledge the necessity for quality measurement in the United States healthcare. With several facts that accompanied the project, it was not all that easy to access the health facility in terms of gaining access to their medical records as well as gain some information that they felt would expose them to security threats. Organizing the interviewees also posed some challenges since some were not ready to openly share whatever they had in mind regarding their community. Being that some facilities at the community level are situated in different locations, it was a task that involved a lot of movement in order to fill some variables. In the event of moving up and down, time was a factor that saw several days elapse since some scenarios needed to be assessed while the patient visited the facility or when people visited community facilities. Accessing hospital files as well was an issue since it needed the attention of the facility staff to aid in retrieving and accessing the relevant files. Some conclusions that were to be made based on observation were very hard to determine since the respondents themselves did not have

Australian Economy over the Last Two Years Essay

Australian Economy over the Last Two Years - Essay Example If you do not see a reference, check your original document in case there is a footnote that Viper has not detected. Viper will show a match where there is a string of 5 or more words that are the same as your work. So it will identify fragments that match, which are not necessarily plagiarism. It is important that Viper does not ignore these fragments as they draw your attention to any sentences where the writer has 'rephrased' parts of the original material (keeping the initial structure) without giving due credit. Sometimes, Viper will identify matching material that is available on websites, but which the Writer may have actually taken from somewhere else (and given proper credit for). So the fact that the work has content which matches a particular website does not mean the Writer has used that website. They may have obtained the material from another source. Viper checks for direct quotes - i.e. material included in quotation marks "like this". It will give you an overall perce ntage of words it thinks are direct quotes. Clearly, this should not be too high as work that relies too heavily on other material is not 'original'. You should also check that all the direct quotes in your paper have actually been referenced by the Writer. Overall Plagiarism Rating This is a general indication of how much matching content the scan found in your work. As a guide: Overall plagiarism rating 6% or less : Highly unlikely to contain plagiarised material. A careful check will only be necessary if this is a lengthy piece (a finding of 6% in a 15,000 word essay, for example, would be of greater concern!) Overall plagiarism rating 6 - 12% : Low risk of containing any plagiarised material. Most of the matching content will probably be fragments. Review your report for any sections that may not have been referenced properly. Overall plagiarism rating 13 - 20% : Medium risk of containing any plagiarised material. There may be sections that match websites - you need to make sure that the Writer has given proper credit for these. The scan may not have detected quotation marks or footnotes that the writer has used (for example, if they have used an opening quotation mark but failed to close it) which could explain the higher result. Check carefully. Overall plagiarism rating 21%+ : High risk of containing plagiarised material. If the overall rating is this high, you need to check your report very carefully. Don't panic - it may just be that there are a lot of matching fragments and the software has not identified all direct quotes (for example, because the Writer has used open inverted commas and not properly closed them, or has used an apostrophe rather than inverted commas for quotes. But you should go through the report very carefully to check that this is the case. Report for '586774.docx' Overall content match: 1% Direct quotes: 0% of which 0% found online. Actual content match minus quotes: 1% Macroeconomics and Microeconomics Name: Institution: Macroe conomics and Microeconomics †¦ Students Paper: †¦ and Microeconomics The Reserve Bank of Australia and the Australian Government has been †¦ http://treasury.gov.au/documents/1754/HTML/docshell.asp?URL=Ken_Henry_speech_to_the_Count_Financial_Canberra_Conference.htm †¦ action by the Reserve Bank of Australia and the Australian Government in response †¦ †¦ has been successful according to the data covering the last two years. In order to see this success,

How to Vote in an Automated Election Essay Example for Free

How to Vote in an Automated Election Essay The Philippines is a developing country. One of the proofs of these developments is the transformation from manual to automated election. New and old voters might have a little information or even nothing at all about this high technology used for the elections. Hopefully, this guide on how to vote in an automated election will make the procedure less confusing for the voters. Synchronized National and Local Elections will be in May 13, 2013 as per RA 7166 Sec. 2 and RA 10153. STEP 1: Go to the designated precinct on May 13 The voter must first find his/her name on the PCVL (Posted Computerized Voters List) posted near the door to determine his/her precinct number and sequence number. The voter must bring a voter’s ID or any valid ID along with the registration stub. Identity of the voter must then be verified by the Bureau of Election Inspector (BEI). STEP 2: How to use the ballot Listen carefully to the instructions of the BEI Chairman on how to properly fill up the ballot. Secrecy folder and a marking pen will be given by the Comelec. Only one ballot will be provided per voter. See to it that the ballot is clean. The oval beside the name of the chosen candidate must be completely shaded. STEP 3: Feed the ballot to the PCOS PCOS stands for Precinct Count Optical Scan machine. The voter will be the one to feed the ballot to the machine. Wait for confirmation or until the ballot is dropped into the semi-transparent box of the machine. If rejected, ask for the assistance of the BEI. The voter should return the secrecy folder and marking pen to the assigned person in the precinct. STEP 4: Go to the BEI for indelible inking The voter will then proceed to the BEI for the putting of indelible ink at the base of the right forefinger nail, then affix thumb mark in the space in the Election Day Computerized Voters List (EDCVL). REFERENCES: Commission on Election http://www.comelec.gov.ph/ Dado, Lauren â€Å"How to Vote in an Automated Election.† Philippine Online Chronicles Esem05 â€Å"Manual Election or Automated Election.† StudyMode.com. 10 2012. 10 2012

Bascule Bridge Design and Construction

Bascule Bridge Design and Construction â€Å"DOUBLE LEAF BASCULE BRIDGE† 1. OBJECTIVES: Become familiar with the wood work. Become familiar with lathe machine and drilling machine. Build a simple pulley. 2. INTRODUCTION: A bascule bridge (commonly referred to as a drawbridge) is a moveable bridge with a counterweight that continuously balances a span, or leaf, throughout its upward swing to provide clearance for boat traffic. It may be single or double leafed. 3. METHOD: Cut out an arch with the scroll saw from the 5-by-7-by-2-inch block of pine wood. Make the arch about 3 inches wide and 4 inches high. Be sure to cut in the longest direction, so that the bottom of the arch becomes the bottom of the tower, and there is 3 inches left above the top of the arch. Measure and mark with the pencil every 1/2 inch across the top of the tower, above the arch. At every other mark, cut a notch 1/2 inch deep and 1/2 inch wide with the scroll saw. These are the tower battlements. Center the tower on the 5-by-10-by-1/2-inch block and nail the two pieces together through the bottom to form the tower base. Lay down the two 4-by-1/2-by-1/2-inch blocks parallel to each other 3 inches apart on your work surface. Lay the eight 4-by-1/2-by-1/8-inch strips across the two blocks. Attach the strips to the blocks with finishing nails. This is your drawbridge. Turn over the drawbridge and tap in two finishing nails, one into each block, as close to the ends as you can without splitting the wood. Leave the nails sticking out past the edges of the drawbridge, about 1/4 inch. This will be the pivot end of your gate. Tap in two more finishing nails, one into each block, about 1/2 inch from the end opposite the pivot end of the drawbridge. Leave the nails sticking past the edges about 1/4 inch. Lay the drawbridge, block side down, on the tower base in front of the tower. Place an upholstery staple over the protruding nails on the pivot end and gently tap the staples into the tower base. This should hold the drawbridge in place while allowing it to rotate freely into open and shut positions. Adjust the staples and nails if needed. Tap two finishing nails into the tower, one on either side at the top of the arch. Make sure they are spaced 4 inches apart, as wide as the drawbridge. Angle the nails at about 45 degrees, and leave half of each nail sticking up. Attach one end of each chain to the nails at the top of the arch. Attach the other ends to the drawbridge. Stain the wood with the paintbrush, then allow to dry. 4. DISCUSSION: SAMPLE DIAGRAM: TERMS AND EXPLANATION: PRACTICAL INFORMATION ABOUT BASCULE BRIDGES: Almost all double leaf bascule bridges consist of two cantilever spans projected toward each other, connected at their tips by a suitable shear lock. Other types of double leaf bascule are comparatively rare, such as those which form arch bridges in the closed position, and are not the topic of this discussion. Double leaf bascule bridges are possibly the least practical, from a maintenance and operation standpoint, of all commonly used types of modern era movable bridges. They use two separate moving leaves when one would do, with all the associated expense in construction, operation, and maintenance of two totally independent movable bridge leaves. They also join these two moving leaves together for the support of live load, compounding the difficulties. There are advantages to double leaf bascules: they can open and close somewhat more quickly than any other type of movable bridge; a double leaf bascule is less affected by wind loads than a single leaf bascule spanning the same channel width; they use slightly less structural steel than other types of movable bridges with the same load rating spanning the same width of navigation channel; double leaf bascules are less susceptible to collision with vessels navigating past them than other movable bridge types, and they are generally consid ered more aesthetically pleasing than other types of movable bridges. One might ask, however, whether these advantages are worth putting up with the additional complications, particularly in regard to stabilizing the structures under live load. Double leaf bascule bridges, more so than most other movable bridge types, frequently have problems with seating. These problems arise from several sources. The bridge may be carrying live loads larger than those designed for, overstressing the support system. The bridge stabilizing devices may have suffered deterioration so that they cannot contain the forces imposed on them. The bridge stabilizing devices may be improperly adjusted so that they do not perform their intended function. The entities which contribute to stability of a double leaf bascule include: live load shoes which form stops for each moving leaf as it attains its seated position; center or shear locks forming a vertical tie between the two leaves of a double leaf bascule bridge when in the closed position; live load anchors which are capable of exerting a downward force at the rear of bridge counterweight; tail locks Which form a shear connection at or near the rear of the bridge counterweight, and adjustment of th e balance of the moving leaf about its axis of rotation. Bascule is French for see-saw. All modern bascule bridges consist of a large moving mass of superstructure, deck, and counterweight, which can be considered balanced for structural purposes. The span can be considered essentially rigid for balancing purposes, as it rotates between opened and closed positions. This applies whether it is a simple trunnion leaf, or a rolling lift of the Scherzer or Ball type. It also applies to the many variations on the articulated counterweight type, as developed by Strauss and others, with the counterweight pivoting about an axis or arc separate from the bridge leaf. An exception to this rule are bascules with operating struts or ropes such as many heel trunnions, some early Scherzer rolling lifts, and others, which do not add simply to the balancing calculations, as they move in a different path than the superstructure. The operating strut could be heavy enough to have a noticeable effect on the balance, but this usually only happens with single lea f railroad bridges. Heel trunnion and articulated counterweight bascule bridges have the counterweight rotating about an axis separate from the leaf itself. The counterweight is always in a fixed position with regard to gravitational moment relative to the bascule span on these bridges, due to the parallelogram arrangement of the pivot points. Double leaf bascule bridges become unstable because they are poorly designed, poorly constructed, or poorly maintained. They are more susceptible to deficiencies from these causes because they are more delicate than other common types of movable bridges. It is very difficult to correct the faults of a poorly designed bridge, but sometimes possible to correct construction defects. It is very difficult to correct the results of poor maintenance except by replacing the components affected. A properly designed double leaf bascule bridge should be very rigid, particularly in regard to primary live load deflections. The leaves of the double leaf bascule should be firmly supported on very solid live load shoes located adjacent to the pier sea wall, as far as possible from the center of rotation. The balance of the double leaf bascule should be such that a dead load reaction exists on the live load shoes, when the bridge is closed, that is substantially in excess of any possible negative reaction, from live load or other sources. The roadway surfaces of the double leaf bascule should be formed so that there is no misalignment at the joints, either at the heels of the leaves or at the toes. This applies to profile as well as elevation the vertical curve should be continuous from one leaf to the other and from each leaf to its approach. Tail locks should be provided as a backup to the stabilization achieved by balancing. The tail locks should firmly grasp the tail end of each leaf with minimum clearances and hold it in the closed position. This will eliminate the possibility of drive machinery being damaged due to live load deflection. CONCLUSION AND RECCOMENDATION: Double leaf bascule bridges become unstable because they are poorly designed, poorly constructed, or poorly maintained. They are more susceptible to deficiencies from these causes because they are more delicate than other common types of movable bridges. It is very difficult to correct the faults of a poorly designed bridge, but sometimes possible to correct construction defects. It is very difficult to correct the results of poor maintenance except by replacing the components affected. A properly designed double leaf bascule bridge should be very rigid, particularly in regard to primary live load deflections. The leaves of the double leaf bascule should be firmly supported on very solid live load shoes located adjacent to the pier sea wall, as far as possible from the center of rotation. The balance of the double leaf bascule should be such that a dead load reaction exists on the live load shoes, when the bridge is closed, that is substantially in excess of any possible negative reaction, from live load or other sources. The roadway surfaces of the double leaf bascule should be formed so that there is no misalignment at the joints, either at the heels of the leaves or at the toes. This applies to profile as well as elevation the vertical curve should be continuous from one leaf to the other and from each leaf to its approach. rail locks should be provided as a backup to the stabilization achieved by balancing. The tail locks should firmly grasp the tail end of each leaf with minimum clearances and hold it in the closed position. This will eliminate the possibility of drive machinery being damaged lue to live load deflection. Movable bridges have been an important part of our nation’s infrastructure for centuries. They present unique challenges to the structural engineer and require extensive coordination of the  structural, mechanical, and electrical systems to achieve a durable and operationally reliable structure. FINAL PROJECT: REFERENCES: http://en.wikipedia.org/wiki/Bascule_bridge http://heavymovablestructures.org/assets/technical_papers/00525.pdf